Wednesday, November 08, 2006

New ceramic battery may replace gas engines by 2008. Charge in 5 minutes, Drive 500 miles?

Good news:
Gentlemen, stop your engines
EEStor's new automotive power source could eliminate the need for the combustion engine - and for oil.

SAN FRANCISCO (Business 2.0 Magazine) -- The Disruptor: EEStor

The Innovation: A ceramic power source for electric cars that could blow away the combustion engine.

The Disrupted: Oil companies and carmakers that don't climb aboard
Forget hybrids and hydrogen-powered vehicles. EEStor, a stealth company in Cedar Park, Texas, is working on an "energy storage" device that could finally give the internal combustion engine a run for its money -- and begin saving us from our oil addiction. "To call it a battery discredits it," says Ian Clifford, the CEO of Toronto-based electric car company Feel Good Cars, which plans to incorporate EEStor's technology in vehicles by 2008.

EEStor's device is not technically a battery because no chemicals are involved. In fact, it contains no hazardous materials whatsoever. Yet it acts like a battery in that it stores electricity. If it works as it's supposed to, it will charge up in five minutes and provide enough energy to drive 500 miles on about $9 worth of electricity. At today's gas prices, covering that distance can cost $60 or more; the EEStor device would power a car for the equivalent of about 45 cents a gallon.
And we mean power a car. "A four-passenger sedan will drive like a Ferrari," Clifford predicts. In contrast, his first electric car, the Zenn, which debuted in August and is powered by a more conventional battery, can't go much faster than a moped and takes hours to charge.

The cost of the engine itself depends on how much energy it can store; an EEStor-powered engine with a range roughly equivalent to that of a gasoline-powered car would cost about $5,200. That's a slight premium over the cost of the gas engine and the other parts the device would replace -- the gas tank, exhaust system, and drivetrain. But getting rid of the need to buy gas should more than make up for the extra cost of an EEStor-powered car.
EEStor is tight-lipped about its device and how it manages to pack such a punch. According to a patent issued in April, the device is made of a ceramic powder coated with aluminum oxide and glass. A bank of these ceramic batteries could be used at "electrical energy stations" where people on the road could charge up.

EEStor is backed by VC firm Kleiner Perkins Caufield & Byers, and the company's founders are engineers Richard Weir and Carl Nelson. CEO Weir, a former IBM-er, won't comment, but his son, Tom, an EEStor VP, acknowledges, "That is pretty much why we are here today, to compete with the internal combustion engine." He also hints that his engine technology is not just for the small passenger vehicles that Clifford is aiming at, but could easily replace the 300-horsepower brutes in today's SUVs. That would make it appealing to automakers like GM (Charts) and Ford (Charts), who are seeing sales of their gas-guzzling SUVs and pickup trucks begin to tank because of exorbitant fuel prices.

CNN and Business 2.0 look at ways to improve technology in terms of engine and fuel efficiency. (September 20)
Play video

"In the wake of rising gasoline costs there have been plenty of alternatives seen on the horizon. Including Hybrids, Biofuels, fuel cells and battery powered all electric cars. CNN has recently posted a story about a company (EEStor) that plans on offering Ultra-Capacitor storage products. The claim being that you charge the ultra-capacitor in 5 minutes, with approximately 9$ (~$.45 a gallon) of electricity and then drive 500 miles."

Patent no. US2004071944 Electrical-energy-storage unit (EESU) utilizing ceramic and integrated-circuit technologies for replacement of electrochemical batteries

Abstract of US2004071944
An electrical-energy-storage unit (EESU) has as a basis material a high-permittivity composition-modified barium titanate ceramic powder. This powder is double coated with the first coating being aluminum oxide and the second coating calcium magnesium aluminosilicate glass. The components of the EESU are manufactured with the use of classical ceramic fabrication techniques which include screen printing alternating multilayers of nickel electrodes and high-permittivitiy composition-modified barium titanate powder, sintering to a closed-pore porous body, followed by hot-isostatic pressing to a void-free body. The components are configured into a multilayer array with the use of a solder-bump technique as the enabling technology so as to provide a parallel configuration of components that has the capability to store electrical energy in the range of 52 kW.h. The total weight of an EESU with this range of electrical energy storage is about 336 pounds.

Comments:
If this product is exist now, I can convert my Combustion Engine to Electric car directly.

Comments:
Thanks for a wonderful share. Your article has proved your hard work and experience you have got in this field. Brilliant .i love it reading.
Mobile car wash Toronto
 
Post a Comment



<< Home

This page is powered by Blogger. Isn't yours?

Free Counter
Free Counter